My first Amiga was Commodore Amiga 500 with Kickstart 1.3 plus TV-modulator in order to get the picture to TV. The contents on the TV were hardly readable as it comes to any text. For playing games quality of graphics output was decent.
Later I got SCART cable to connect the graphics output of Amiga to TV. That was something else, one could even read the text on the TV without getting red eyes and tears. 🙂 A bit later I finally got a 14” monitor to use with Amiga SCART cable as the connect cable for graphics and sound output.
It was 1988 when SoundTracker 2.5 was released, which was the first SoundTracker that didn’t crash on Amigas with Kickstart 1.3. I don’t have any real education on making music. The way I have learned making music was listening to ”real” music and music modules other people had composed with Amiga. As I got my Amiga 500’s audio output connected to an old Pioneer amplifier with big speakers it was simply amazing to listen to Amiga’s music that was built with 8-bit samples.
Working with an Amiga 500 with only 512kb of (CHIP) RAM was quite a limitation. Usually I didn’t use Workbench (Amiga’s graphical user interface) but AmigaDos as operating system environment when programming with Amiga. This was because Workbench of course took some of the limited amount of memory available for the user.
Here’s a video from one unfinished Amiga project I was working 2003 – 2004 (not from my early Amiga times, though 🙂 ):
With only one disc drive (with Amiga 500 I didn’t ever have a hard disk) all the AmigaDos commands were read from directory named ”c” – c for command. For the sake of speed (disc drives are slow) it was possible to put the most used AmigaDos commands to RAM disc or make them “permanent” to RAM memory. I don’t remember the AmigaDos command to do this, but this was faster than reading from the RAM disc anyway… Putting AmigaDos commands to RAM of course also decreased the amount of available memory for example for a text editor and testing the compiled and linked assembly program…
Later, when I bought an additional disc drive, Senator, to my Amiga 500 working got easier: It wasn’t only the question of available memory, but also the available space on a single disc. Full capacity of Amiga’s DD disc is 880kb, the space available after formatting the disc was of course a little less.
When working with the additional disc drive, I made boot disc of my own to start the system, where I had put all the needed AmigaDos commands, libraries, applications and so on. My own work was on the additional disc drive. Ah, how things got easier…
The description above compared to working with desktop systems nowadays may be a bit amusing to younger generations… 🙂